Evolution.
the Triumph of
Technology

RATR8P03038-01





The First True Dimmable Driver-on-Board
FRD on the market



Buy on ROBUSdirect English Brochure French Brochure German Brochure



8W LED FIRE RATED DOWNLIGHT
provides the best of today’s state of the art technology.







Click an icon for more info


ACTIVATE True Driver-On-Board

ACTIVATE True Driver-On-Board (DOB) technology eliminates the electrolytic capacitor and provides driver efficiency and reliability to improve LED lifetime. All power supply, driver components, dimming functionality, power factor, surge & thermal protection are integrated onto the LED PCB powered directly from the mains supply.

ACTIVATE is a very efficient technology which is significantly more reliable than separate, or driver ‘integrated’ into the fitting or heat sink.

  • Easy to install. No external driver to locate in the void, nor issues of incorrectly connecting a mains supply to a LV fitting causing failure
  • Electrolytic capacitor free – eliminates the weakest component
  • Light engine with driver-on-board manufactured in a fully automated semiconductor plant with machine vision quality control
  • Driver-on-board consumes less power and is more efficient
  • Provides IC control for stable drive current to maximise LED performance and life
  • Smooth dimming functionality is achieved using a range of selected dimmers
  • Natural and soft dimming of the uniform LED COB
  • 5 year warranty, no quibble, no online registration

CHIP ON BOARD

The TRIUMPH ACTIVATE doesn’t stop at DOB technology. It also uses the latest Chip-on-board (COB) LED technology, delivering a high lumen output of ≥640lm in a single beam, low power consumption of 8W and low heat emissions.

Of particular consideration for lighting designs, the single chip light beam is easier to control, allows the use of a LEDCHROIC™ optic, and brings greater uniformity than multiple SMD or multi-lens LED fittings.

Compared to 50W GU10 halogen, the TRIUMPH ACTIVATE produces:

  • Over 35% more light output, so fewer fittings may be used for the same lighting effect, reducing costs
  • Energy savings in excess of 90%, reducing CO2 emissions and electricity costs
  • Efficacy of ≥80 luminaire lm/cctW, compliant with Part L1 & L2 UK Building Regulations
  • LEDs run cooler, resulting in 50,000 hour life – compared to halogen lamp changes every 1,000 hours, saving on maintenance costs

LEDCHROIC

The ROBUS innovation of low profile LEDCHROIC™ 38o optic and reflector technology gives the traditional look of a dichroic lamp with the efficiency of LED technology. The LEDCHROIC™ lens has a uniform light beam with gentle cut-off at extremities without any dark patches. It ensures minimal glare and delivers an even distribution of light, also with a high CRI making the TRIUMPH an excellent replacement for traditional halogen downlighting.
ROBUS has introduced a newly customised low profile LEDCHROIC™ optic for its TRIUMPH range, offering interchangeability to an accessory wide beam LEDCHROIC™ 60° optic lens available which provides wide or extra wide light beam for bespoke lighting using the same lens form factor.

  • 38° beam angle as standard and 60° beam angle accessory option
  • High lumen output
  • Controlled even light distribution
  • Single light emitting surface

SWIFT CONNECTOR

The Swift connector system saves time and money by providing a fast and simple method of connecting an infinite number of standard and emergency fittings to the wiring infrastructure. The male connector is factory wired to the fitting with the female connector included for site installation.

It utilises 4 poles, each of which is able to accept 3 x 2.5mm2 conductors on the supply (female side) and has cable restraint for 3 x 4 core cables. These would typically consist of:

Cable 1: Permanent live, earth & neutral.
Cable 2: Earth, live & switched live to/from switch
Cable 3: Loop out permanent live, neutral, earth and switched live to additional fittings

FIRE RATED

The TRIUMPH ACTIVATE steel can and brass fire shield ensures maximum fire safety by stopping flames from entering the ceiling void and also protecting the heat sink from flammable dust. The fire shield is designed to conduct heat away from the core components and LED COB while resisting fire. ROBUS has designed a customised heat sink for TRIUMPH ACTIVATE. The high surface area aluminium finned heat sink provides optimal heat conduction away from the COB LED’s and DOB components to ensure long service life.

Integrated insulation stand-off protects the heat sink from flammable dust and also allows insulation to be loosely applied above and around the fitting and so avoids ‘cold spots’ in insulated voids. This also ensures there is a sufficient air gap between the insulation and the fitting for efficient operation.

The TRIUMPH ACTIVATE retains the integrity of fire rated ceilings. It is fire, acoustic and airflow tested, providing compliance with Parts B, C & E of the Building Regulations for installation in most buildings.

DIMMABLE

Dimmable as standard.

TWISTNLOCK

Supplied with a high quality white twist and lock detachable bezel. Chrome and Brushed Chrome bezels available as accessory.



What is 'True' Driver On Board?

What is the difference between True, Partial & Intergrated Drivers?

LED drivers can now be fabricated using integrated circuit electronics on the same circuit board (PCB) as the LED chips. This is called ‘Driver-On-Board’ technology, where all driver components are on the board, which is AC powered directly from the mains supply. This is a more advanced concept than simply enclosing, or bolting on a traditional external driver.

Usually has an integrated circuit on the printed circuit board, but often has other circuitry located elsewhere in the fitting, typically in the heat sink region, compromising its performance and the reliability of the fitting.

Generally means that the driver circuitry is located elsewhere in the fitting, typically in the heat sink region, reducing the thermal mass of heat sinking and the efficiency of heat transport. Driver circuitry will typically be conventional.

RATR8P03038-01 RATR8P04038-01
Comparable to: LV 50W Halogen LV 50W Halogen
Total Power (W): 8 8
Power Factor: >0.98 >0.98
Total Light Output (lm): 640 680
Beam Angle (deg): 38 38
Lux at 1m (lux): 1,140 1,190
CCT L100 (K): 3,000 4,000
CRI at L100: >80 >80
Efficacy (lm/cctW): 80 85
Lifetime (hrs): 50,000 50,000
Diameter (mm): 92 92
Height (mm): 98 98
Cut-out (mm): 70 70
Min Order/Carton Qty: 1/18 1/18
Weight: 0.34 0.34
IP: 65 65
  • True ACTIVATE Driver-On-Board (DOB) mains operated technology – providing dimmability, driver efficiency and reliability (no electrolytic capacitor)
  • Chip-On-Board (COB) for superb light output, high efficacy and long life
  • High lumen output of ≥ 640 lumens
  • Low power consumption of 8W
  • Low heat emissions
  • Efficacy of ≥ 80 luminaire lm/cctW to comply with Part L1 & L2 UK Building Regulations
  • Fire, acoustic and airflow tested in compliance with Parts B, C & E of UK Building Regulations
  • Integrated insulation stand-off enabling insulation to be laid over the fitting
  • LEDCHROIC™ optic achieving unequalled light distribution, uniformity and clarity, whilst replicating traditional dichroic aesthetics
  • Pre-wired with ROBUS SWIFT 4 pin male/female plug & play connector with large terminals and integrated cable restraint. Fast, simple and efficient installability
  • Wide flange with short narrow main body which covers existing cut-outs. Ideal for retro-fit and shallow ceiling voids
  • Dimmable with selected dimmers (dimmer compatibility list available on website)
  • Emergency versions available. In emergency mode the warm white provides 120 lumens and in cool white 135 lumens (18% of mains output).
  • Accessories available as per below: 60° lens, Chrome and Brushed Chrome Bezels
  • Operating temperature range of -20°C to +45°C
  • IP65
Let’s have a look at a typical example, comparing the performance of 50W mains voltage halogen against the 8W TRIUMPH ACTIVATE in a lounge 6m x 5m with ceiling 2.4m high and requiring around 350-400 average lux level.

  • ROBUS TRIUMPH ACTIVATE
  • LEADING BRAND OF HIGH QUALITY GU10 LAMP


GENERAL
Calculation algorithm used Average indirect fraction/td>
Height of evaluation surface 0.75m
Height of luminaire plane 2.40m
Maintenance factor 0.80
Total luminous flux of all lamps 13,404lm
Total Power 166.0W
Total Power area 5.53 W/m2 (30.00m2)
Evaluation area 1 Reference plane 1.1
Horizontal
Em 379lx
Emin 295lx
Emin/Eav (Uo) 0.78
Position 0.75m
EM Uo
m 1.5 (Ceiling) 54lx 0.83
m 1.1 (Wall) 102lx 0.63
m 1.2 (Wall) 100lx 0.64
m 1.3 (Wall) 96lx 0.64
m 1.4 (Wall) 101lx 0.62
GENERAL
Calculation algorithm used Average indirect fraction/td>
Height of evaluation surface 0.75m
Height of luminaire plane 2.40m
Maintenance factor 0.80
Total luminous flux of all lamps 12,780lm
Total Power 1,836.0W
Total Power area 61.20W/m2 (30.00m2)
Evaluation area 1 Reference plane 1.1
Horizontal
Em 358lx
Emin 312lx
Emin/Eav (Uo) 0.87
Position 0.75m
Major surfaces EM Uo
m 1.5 (Ceiling) 51lx 0.82
m 1.1 (Wall) 94lx 0.59
m 1.2 (Wall) 96lx 0.60
m 1.3 (Wall) 93lx 0.52
m 1.4 (Wall) 88Lx 0.59
ROBUS TRIUMPH ACTIVATE
LEADING BRAND OF HIGH QUALITY GU10 LAMP
GENERAL
Calculation algorithm used Average indirect fraction/td>
Height of evaluation surface 0.75m
Height of luminaire plane 2.40m
Maintenance factor 0.80
Total luminous flux of all lamps 12,780lm
Total Power 1,836.0W
Total Power area 61.20W/m2 (30.00m2)
Evaluation area 1 Reference plane 1.1
Horizontal
Em 358lx
Emin 312lx
Emin/Eav (Uo) 0.87
Position 0.75m
Major surfaces EM Uo
m 1.5 (Ceiling) 51lx 0.82
m 1.1 (Wall) 94lx 0.59
m 1.2 (Wall) 96lx 0.60
m 1.3 (Wall) 93lx 0.52
m 1.4 (Wall) 88Lx 0.59

TRIUMPH ACTIVATE provides comparable light output, uses over 40% fewer fittings and saves over 90% energy to provide massive initial and long term savings. Compare the performance of the TRIUMPH ACTIVATE against a leading brand of quality GU10 product below and see the difference in costs and performance.
Leading brand of halogen 50W GU10 TRIUMPH ACTIVATE 8W SAVINGS
Total fittings used 36 20
Average illuminance 358lx 379lx
Total luminous flux of all lamps 12,780 lm 13,404 lm
Total power 1836 W 166 W
Total power per area 61.2 W/m² 5.53 W/m²
Total energy used per year (kWhrs): 3342 302 3040
CO2 emissions (tonnes per year) 1.82 0.16 1.66
Total energy cost per year £401/€557 £36/€50 £365/€507
Total re-Lamp cost per year £65/€90 £/€0.00 £65/€90
Total cost of ownership per year £466/€649 £36/€50 £430/€599
Note: The above costs and savings are based on 5 hours use each day, replacement halogen lamp cost of £1/€1.40 lamp and electricity cost @ £0.12/€0.17/kWhr. A more detailed energy saving and payback calculation can be achieved using the downloadable calculator on www.ledgrouprobus.com which shows payback periods in a few months, such is the energy saving of this downlight.







ENERGY SAVINGS

With the Driver-on-board (DOB) and Chip-on-board (COB) combination the TRIUMPH ACTIVATE creates 70% more light output compared to 50W GU10 halogen.

a. FEWER FITTINGS REQUIRED
The TRIUMPH ACTIVATE delivers 640/680 lumens spread across a 38° or a wide 60° beam angle meaning the same light levels as a 50W GU10 halogen can be achieved with 44% fewer fittings, saving initially on fitting costs and installation times and in the long term on energy bills.

b. 90% LESS ENERGY THAN HALOGEN
The TRIUMPHACTIVATE delivers on average 50,000 hours of consistent LED performance, while using 90% less energy, reducing CO2 emissions and electricity costs. (Based on a 6mx5m meeting room with 2.4m high ceiling with the light level reference plane at desk height (0.75m) and target average lux level of 350-400 lux).

c. CASH SAVINGS
A 6M X 5M room fitted out with TRIUMPH ACTIVATE instead of traditional halogen would typically save £430 / €590 per annum.

SWIFT CONNECTOR SYSTEM


  • The female connector can be wired into the lighting circuit infrastructure at an early stage
  • The male connector is pre-wired to the fitting so time saving
  • Large terminals facilitate loop in/out for 3 conductors to other connectors and switches
  • The 4th terminal provides a distributed permanent/loop live to all fittings for emergency or other use
  • The first connector can be used for wiring to an emergency test switch permanent supply as well as to the light switch. This negates the need for a junction box and additional terminations, saving both time and money
  • Fittings are not connected until final completion ensuring they are not damaged by other trades such as plasterers, painters or suspended ceiling installers during fit-out
  • A presence detector can be used by substituting the wiring to the switch with a 4 core cable (Ls, E, N & Lp)
  • Plug & play emergency pack is simply installed between the fitting male, and mains supply female, connectors where required providing a fast, simple and versatile emergency solution





LOADPRO LED Dimmer

  • Trailing edge electronic dimmer optimised for LED loads
  • Suitable for 2 way switching
  • Min load of 3W
  • Max LED load of 133W
  • Max resistive load of 200W
  • Compatible with most recessed or surface back boxes and is suitable to be fitted to most white or decorative switch plates
  • Soft start
  • Push on/off operation
  • Overload protection
  • Fits standard 41mm depth box

RLA200DT-01 As seen here in red
RLA200DTP-01 White front plate
Min load: 3W
Max resistive load: 200W
Max LED load: 133W
Height (mm): 62
Width (mm): 24
Depth (mm): 46
Pack Qty: 10


Video

< !-- prettyPhoto Image Lightbox -->